**日本SMC隔膜泵，SMC隔膜泵中文樣本

**日本SMC隔膜泵，SMC隔膜泵中文樣本
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；17321017802@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
PA3120 PA3210 PA3220 PA3113
Discharge rate
Average discharge pressure
Pilot air pressure
Air consumption           
Withstand pressure
it can be used with operation at lower cycles. Since a large quantity of liquid will be pumped out,
use a suitable throttle in the discharge port if problems occur.
Note 3) With a low number of operating cycles, even a valve with a small Cv factor can be operated.
SCS14 ADC12 SCS14
1.7 kg 2.2 kg 1.7 kg 2.2 kg
100 million times 50 million times 50 million times 100 million times
General environment
Ambient temperature
Recommended operating cycle
Pilot air solenoid valve recommended Cv factor
Mounting orientation
Main fluid suction discharge port
Pilot air supply/exhaust port
Body wetted areas
NBR NBR PTFE
? Refer to page 727 for maintenance parts. ? For related products, refer to page 728 and 729. Note
1) With cycles at 2 Hz or more Note 2) After initial suction of liquid operating at 1 to 7 Hz,
0.2 to 0.7 MPa Max. 200 l/min (ANR) or less
80 dB (A) or less (Option: with silencer, AN200)
0.1 to 12 l/min 0 to 0.4 MPa
0.1 to 0.5 MPa Max. 150 l/min (ANR) or less
0.75 MPa
50 million times
Rc, NPT, G, NPTF 3/8" Female thread
Rc, NPT, G, NPTF 1/4" Female threadA
1 m (Interior of pump dry)
Made to order specifications (For details, refer to pages 724 to 726)
Products complying with ATEX With air operated reset port Note) With operating cycle counting port Note)
Note) For automatically operated type only.
? Each of the values above are for normal temperatures and when the transferred fluid is fresh water.
Automatically operated
1 to 20 l/min 0 to 0.6 MPa
Diaphragm life
Fluid temperature
Up to 6 m (liquid inside pump)
0 to 60°C (No freezing) 0 to 60°C (No freezing)
Horizontal (with mounting foot at bottom)

**日本SMC隔膜泵，SMC隔膜泵中文樣本