銷售BURKERT氣動二通隔膜調節閥，供應寶得氣動二通隔膜調節閥

銷售BURKERT氣動二通隔膜調節閥，供應寶得氣動二通隔膜調節閥
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；17321017802@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
適合要求的理想調節閥
通過隔膜將介質與驅動裝置嚴格分離
堅固的通用驅動裝置，具有模塊化配件系列
帶有連接套頭、壓合接頭或焊接接頭的不銹鋼外殼
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.
Technical data Materials Body    Actuator
Cast stainless steel 316L/1.4435 PA polyamide (PPS on request) Diaphragm materials EPDM (AB), PTFE/EPDM (EA) EPDM (AD), advanced PTFE/EPDM (EU) and FKM (FF) on request Process medium For neutral gases and liquids, high purity, sterile aggressive or abrasive ? uids Viscosity Up to viscous Surface ? nish internal mechanical polished (external cast surface) On request internal electro polished  (external cast surface electro polished) (average surface ? nish) Ra ≤ 0.8 μm Ra ≤ 0.6 μm Medium temperature EPDM (AB), PTFE/EPDM (EA)  EPDM (AD), advanced PTFE/ EPDM (EU) FKM (FF) -10 to + 130 °C (steam sterilisation +140 °C for 60min) -5 to +143 °C (steam sterilisation +150 °C for 60min) 0 to +130 °C (not recommended for steam) Ambient temperature -10 to +60 °C Control medium (for coupling with a positioner) Instrumental air class 3 acc. to DIN ISO 8573-1 Pilot pressure 5.5 to 7 bar with actuator sizes ?80 to 125 mm Pilot air ports G1/4 (stainless steel) Flow characteristic See chart p. 2
The new generation of integrated positioners for combination with actuators from the process valve series Type 23xx/2103 is specially designed for the requirements of hygienic process environments. The operation and selection of the software functions close tight function, inversion of the operating direction of the setpoint signal, characteristic curves selection and switching manual/automatic operation are effected via push-buttons and DIP switches or via the PC interface. The position setpoint is set using the standard signal 4 - 20 mA. In
addition, the enable can be controlled via the binary input and an optional position feedback can be integrated.   The positioner, Type 8694, registers the valve position without
The Type 2731 can be actuated by the 8635 SideControl, SideControls 8792/93 Remote versions or the 8694/8692/8693 TopControl forming a mechanical and functional unit and thus offering a complete control valve system. Using this control valve, continuous regulation tasks for ? uids can be solved.
 deterioration through a contact-free analogue position sensor. Single-acting or double-acting actuators are controlled via the integral positioner system. An AS-Interface communication interface is available as an option. Main customer bene? ts: ? Compact design of the valve system with integrated positioner  meets the demands for plant washdown environments through the  selection of materials, external seals and integrated control air  supply to the actuator ? Automatic parameterisation of the process controller using the  Process TUNE function ? Field bus communication via optional AS-Interface ? Air intake ? lter enhances the process valve system availability ? Simple and reliable actuator adaption allowing additional actuators  of the process valve series, Type 20xx or actuators from other  manufacturers to be used ? Explosion-proof models for zone 2/22
The diaphragm control valve Type 2731 consists of a pneumatically operated piston actuator, a diaphragm and a valve body made of investment cast stainless steel.
The actuator has been designed so that the stroke can be continuously changed. This makes a favourable characteristic possible for the continuous change of the ? ow.

銷售BURKERT氣動二通隔膜調節閥，供應寶得氣動二通隔膜調節閥